Resins for Desktop LCD/DLP
Resins for Desktop LCD/DLP
details
Resins for Desktop SLA
Resins for Desktop SLA
details
Resins for Industrial 3D Printers
Resins for Industrial 3D Printers
details
Polyamide (Nylon) for SLS
Polyamide (Nylon) for SLS
details
Gypsum and Binders for CJP
Gypsum and Binders for CJP
details
Basic Resin
Basic Resin

Designed for daily use in 3D printers for printing models. Resin is odorless, models are rigid, low shrinkage and high accuracy

Scroll down
Basic Resin

Designed for daily use in 3D printers for printing models. Resin is odorless, models are rigid, low shrinkage and high accuracy

HARZ Labs Basic Resin is a good choice to do first steps in 3D printing. The absence of odor and low toxicity makes the resin ideal for use in the office, schools and universities. It is easy-to-operate with it due to low viscosity – easy to fill vat, to filter, to clean model and printer parts.

Resins is very accurate in wide area of curing time, that provide a good quality even at mistaken exposure, which reduces the time for learning 3d printing skills.

Liquid

The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time.

Odorless

Resins are odorless and cause no irritation, so you can work with natural ventilation without special technique.

Low shrinkage

Shrinkage less than 1% gives you the same size like 3D model on your computer.

Safe

Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction

Hard

Resin is hard ang tough, showing 82 Shore D hardness, not brittle, you will never damage model separating it from the table

Stable

Resin is very stable, you can leave it for a long time in the vat, no sedimentation and gel formation occur – no need to mix.

Characteristics Value
Appearance Colored transparent liquid
Color Red
Odor Odorless
Viscosity according to Brookfield 0.6-0.8 Pa*s
Tensile strength 20 N/mm2
Elongation at break 6-7%
Hardness Shore D 80-85
Shrinkage 2.5%