Designed for surgery guide modelling. Precise, transparent, very tough and hard, odorless
Dental Yellow Clear is hard PMMA-like resin, made of biocompatible raw materials that used in UV-cured dental fillings. It has high hardness 92 Shore D and high tensile strength, stability to mechanical stress. We recommend to use it for surgical guides and master-model printing. Low odor and absence of harmful monomers allows to print in the laboratory.
Very precise resin, able to print dental models where exact size and fitting is a must
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction, can be used in lab or even at home
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring.
The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time.
Very high hardness and tensile strength
Models has long-term stability under 100*C that make possible to cast it in cold and hot silicone or 2k resin molds. Also has short-term stability up to 180*C and models can be used for films thermosettling
|Appearance||Colored transparent liquid|
|Viscosity according to Brookfield||1-1.2 Pa*s|
|Tensile strength||60 N/mm2|
|Elongation at break||4-6%|
|Hardness Shore D||90-92|