ARTICLE : 734
Dental Model Bone
Dental Model Bone
Dental Model Bone
Dental Model Bone

Dental Model Bone

Designed for printing dental models. Durable, hard, and resistant to high temperature during clear aligners thermoforming. Meets the requirements of iso 10993

VAT incl.
€120
1 kg
0,5 kg
+
Bone
1 kg
0,5 kg
+
VAT incl.
€120

Description

Dental Model resin is made from biocompatible raw materials. It has a matte surface, high durability and tensile strength. Available colors: Peach (available for Form2), Beige, Bone. The slight odor and lack of hazardous monomers allow for performing printing even in a small laboratory.

Characteristics

  • Opaque liquid Appearance
  • Bone Color
  • 11 ± 1 % Elongation at break
  • 84.0 ± 2.0 Hardness Shore D
  • Weak odor Odor
  • <0.3% Shrinkage
  • 80.0 ± 10 MPa Tensile strength
  • 900 ± 300 мПа∙с Viscosity according to Brookfield

Benefits

                        Safe

Safe

Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home

                        Low shrinkage

Low shrinkage

Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring

                        Accurate

Accurate

Provides high precision printing

                        Biocompatible

Biocompatible

Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993

                        Durable

Durable

Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears

                        Heat resistance

Heat resistance

Models has long-term stability under 100°. Also has short-term stability up to 180°C and can be used for films thermosettling

Printers

Photos

Documents

Material Technical Data Sheet
Material safety data sheet
Download all documents