Rate website

General impression of working with the website

Suggestions for improving

Thank you!
Choose a grade
Rate website
ARTICLE : 307
Dental Pink
Dental Pink
Dental Pink
Dental Pink

Dental Pink

Designed for printing models of temporary denture bases with pink color. Tough, glossy, and stable to deformations. Meets the requirements of ISO 10993.

VAT incl.
€120
1 kg
0,5 kg
+
Pink
1 kg
0,5 kg
+
VAT incl.
€120

Description

Dental Pink is a hard PMMA-like resin, made of biocompatible raw materials. It is designed for printing models of temporary denture bases. It has high durability and high tensile strength, resistant to mechanical and chemical effects. The slight odor and lack of hazardous monomers allow for using it even in a small laboratory.

Characteristics

  • Opaque liquid Appearance
  • Pink Color
  • 6.8 ± 2.1 % Elongation at break
  • 82 ± 3 Hardness Shore D
  • Weak odor Odor
  • <0.5% Shrinkage
  • 65.1 ± 2.1 MPa Tensile strength
  • 1050 ± 250 mPa*s Viscosity according to Brookfield

Product video

Benefits

                        Safe

Safe

Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home

                        Low shrinkage

Low shrinkage

Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring

                        Liquid

Liquid

The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time

                        Biocompatible

Biocompatible

Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993

                        Durable

Durable

Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears

                        Unique mechanical properties

Unique mechanical properties

Very high hardness, tensile strength, abrasion and scratch resistance due to ceramic fillers

                        Sertification

Sertification

Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN 2020/12007

Printers

Photos

Documents

Material Technical Data Sheet
Material safety data sheet
Download all documents