Become a reseller RU
Resins for Desktop LCD/DLP
Resins for Desktop LCD/DLP
details
Resins for Desktop SLA
Resins for Desktop SLA
details
Resins for Industrial 3D Printers
Resins for Industrial 3D Printers
details
Gypsum and Binders for CJP
Gypsum and Binders for CJP
details
Advice and answers from the Harzlabs Team

HARZ Labs Glaze


HARZ Labs Glaze is a UV-curing high gloss acrylic varnish. It does not contain methyl methacrylate and other drug precursors. Designed to strengthen and to increase durability for temporary crowns, bridges, denture bases, prostheses, caps. It is cured under LED-UV sources without tacky layer and does not require further sanding.

Degrease the surface with isopropyl or ethyl alcohol before applying Harz Labs Glaze. Apply the clearcoat to the surface with a brush, hold for at least 60 seconds (depending on the thickness of the applied layer) to achieve complete leveling and removal of solvent residue. Cure the covered surface with a UV light source (405 nm, 4.9 mW / cm2) for at least 10 minutes. At the end of curing, the product should not have a tacky layer. Do not apply the material directly in the mouth.
Ask your question