Settings for Phrozen Sonic XL 4K

You can download configuration file with settings for your printer. If you have any questions about how to upload profiles to the slicer, use our guide. To accurately calibrate the printer exposure time, use our calibration test, you can learn more about it in our guide about the test.
Here is approximate curing time for HARZ Labs resins for Phrozen Sonic XL 4K. Please use our calibrating file for fine calibrating your own 3D printer.

Resin	Exposure 50µm (Base exposure)	Exposure 100µm (Base exposure)	Lift/retract speed	Wait before print
Dental Sand A1-A2	2.5-3,4s (20s)	2,8-3,7s (30s)	100mm/min 1,7mm/s	4s
Dental Sand A3	2.5-3,4s (20s)	2,8-3,7s (30s)	100mm/min 1,7mm/s	4s
Dental Bleach	2.5-3,4s (20s)	2,8-3,7s (30s)	100mm/min 1,7mm/s	4s
Dental Yellow Clear	2,9-3,7s (40s)	3,1-4,2s (50s)	100mm/min 1,7mm/s	4s
Dental Clear	2,9-3,7s (40s)	3,1-4,2s (50s)	100mm/min 1,7mm/s	4s
Dental Peach	3,5-4s (60s)	3,7-4,5s (70s)	100mm/min 1,7mm/sec	4s
Dental Pink	2,9-3,7s (40s)	3,1-4,2s (50s)	100mm/min 1,7mm/s	4s
Dental RO	2,9-3,7s (40s)	3-4s (50s)	100mm/min 1,7mm/s	4s
Dental Cast Cherry	4,2-5,2s (30s)	-	50mm/min 0,8mm/s	4s
Dental Cast Red	3,2-3,7s (30s)	-	50mm/min 0,8mm/s	4s
Model Black	3,7-4,5s (30s)	-	200mm/min 3,3mm/s	4s
Model Blue	1,1-1,3s (10s)	1,6-1,9s (20s)	200mm/min 3,3mm/s	4s
Model Cherry	3,7-4,5s (30s)	-	200mm/min 3,3mm/s	4s
Model Clear	1,4-1,7s (20s)	2,1-2,4s (20s)	200mm/min 3,3mm/s	4s
Model Grey	3,4-4s (60s)	3,7-4,4s (70s)	200mm/min 3,3mm/s	4с
Model NC	1,1-1,2s (10s)	1,6-1,9s (20s)	200mm/min 3,3mm/s	4s
Model White	3,1-4,2s (60s)	3,6-4,5s (70s)	200mm/min 3,3mm/s	4с
ART Glow	1,2-1,4s (10s)	1,7-2s (20s)	100mm/min 1,7mm/s	4s
J-Cast	4,3-5,3s (30s)	-	50mm/min 0,8mm/s	4s
Industrial ABS	4,5-5,5s (50s)	-	50mm/min 0,8mm/s	4s
Industrial FLEX	4,5-5,5s (50s)	-	50mm/min 0,8mm/s	4s
Basic Red	1,3-1,5s (10s)	1,9-2,3s (20s)	100mm/min 1,7mm/s	4s
DentalTray	-	4-5,4s (50s)	100mm/min 1.7mm/s	4s