Rate website
Rate website
Dental Cast Cherry PRO
Description
Stable and precise material. Designed for printing models used for direct casting and pressed ceramics. With zero ash content (less than 0.1%) and readiness for use in shock cycles, it allows for obtaining high-quality casting results with smooth surface without pores. The resin has been designed to burn out quickly at high temperatures to reduce production time. We recommend using phosphate-bonded casting investment material that can handle plastics at high temperatures to ensure the best casting quality. To achieve the best casting quality, we recommend carefully following the manufacturer's instructions for the casting investment material. The slight odor and lack of hazardous monomers allow for using it even in a small laboratory. Meets the requirements of ISO 10993.
Characteristics
- Colored liquid Appearance
- < 0.1 % Ash content
- Cherry (semitransparent) Color
- 86.0 ± 2.0 Hardness Shore D
- Weak odor Odor
- 400 ± 200 mPa Viscosity according to Brookfield
- 1500 ± 300 MPa Flexural modulus of elasticity
- 12.0 ± 3.0 % Elongation at break
Product video
Benefits
Safe
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
Accurate
Provides high precision printing
Zero ash content
Close to zero ash content (<0.1%) and high strength makes it possible to cast precise metal and ceramic products
Easy to cast
Thermoplastic behavior of the resin provides melting in wide temperature window (250-300°C) to give very smooth surface of casted models
Sertification
Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN 2020/12007
Printers
Photos
