Rate website
Rate website
Dental Peach
Description
Dental Peach photopolymer is a matte resin made from biocompatible raw materials. Available colors: Peach (available for Form2), Beige,Bone. It has a high Shore D hardness and high tensile strength, resistant to mechanical and thermal influences. The weakly expressed smell and the absence of harmful monomers allows you to work with it even in a small laboratory. Certified for medical use. Registration certificate for a medical device No. RZN 2020/12007.
Characteristics
- Opaque liquid Appearance
- Peach Color
- 7.1 ± 3.1% Elongation at break
- 79.0 ± 2.0 Hardness Shore D
- Weak odor Odor
- <0.5% Shrinkage
- 45.2 ± 4.4 MPa Tensile strength
- 575 ± 225 mPa·s Viscosity according to Brookfield
Product video
Benefits
Safe
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
Low shrinkage
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
Accurate
Provides high precision printing
Biocompatible
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Durable
Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears
Heat resistance
Models has long-term stability under 100°. Also has short-term stability up to 180°C and can be used for films thermosettling
Sertification
Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN 2020/12007
Printers
Photos
