Rate website
Rate website
We recommend
Dental Sand
Description
Dental Sand is a resin with PMMA-type ceramic micro filling, made of biocompatible raw materials. Available in shades: A1-A2, A3. It has high durability and high tensile strength, resistant to mechanical and chemical effects. Recommended for printing models of temporary crowns and bridges. The slight odor and lack of hazardous monomers allow for using it even in a small laboratory.
Characteristics
- Opaque liquid Appearance
- А1-А2, А3, Bleach Color
- 7.1 ± 3.1 % Elongation at break
- 82.0 ± 3.0 Hardness Shore D
- Weak odor Odor
- <0.5% Shrinkage
- 95.0 ±10.0 MPa Bending strength
- 1050 ± 250 mPa*s Viscosity according to Brookfield
Product video
Benefits
Safe
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
Low shrinkage
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
Biocompatible
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Stable color
Depending on postcuring condition. Bleach color is achievable. It is stable for a long time even in aggressive media
Durable
Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears
Unique mechanical properties
Very high hardness, tensile strength, abrasion and scratch resistance due to ceramic fillers
Sertification
Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN 2020/12007
Printers
Photos
