Rate website
Rate website
Dental Sand PRO
Description
Due to low moisture absorption and balanced micro ceramic-filling, this resin makes it possible to produce models with long service life and durability. Printed crown and bridge models are polished well and can be customized using composite stains. A slight odor and the absence of harmful monomers allow you to work even in a small room. Meets the requirements of ISO 10993.
Characteristics
- Opaque liquid Appearance
- А1-А2, А3 Color
- 4.1 ± 1.1 % Elongation at break
- 96 ± 3 Hardness Shore D
- Weak odor Odor
- <0.5% Shrinkage
- 600 - 1200 mPa·s Viscosity according to Brookfield
Benefits
Safe
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
Low shrinkage
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
Biocompatible
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Stable color
Depending on postcuring condition. Bleach color is achievable. It is stable for a long time even in aggressive media
Durable
Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears
Unique mechanical properties
Very high hardness, tensile strength, abrasion and scratch resistance due to ceramic fillers
Sertification
Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN 2020/12007
Printers
Photos
