Rate website
Rate website
Model
Description
Model Resin allows you to print miniatures, artwork, etc. Precise, well-suited for priming and painting. This material can be well processed mechanically and polished. Low odor and absence of harmful monomers enables working with it even in a small workshop.
Characteristics
- Colored transparent liquid Appearance
- Clear, Grey, Black, White, Cherry, Blue Color
- 6.1 ± 2.1 % Elongation at break
- 74.0 ± 2.0 Hardness Shore D
- Odorless Odor
- <0.5% Shrinkage
- 45.2 ± 4.3 mPa*s Tensile strength
- 750 ± 250 Pa*s Viscosity according to Brookfield
Benefits
Heat resistance
Models has long-term stability under 100°. Also has short-term stability up to 180°C and can be used for films thermosettling
Odorless
Resins are odorless and cause no irritation, so you can work with natural ventilation without special technique
Low shrinkage
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
Safe
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
Stable
Resin is very stable, you can leave it for a long time in the vat, no sedimentation and gel formation occur – no need to mix
Color
Very wide color choice gives an advantage to the customer. Clear and White resins are specially for DIY tinting so you can easily get your own color shade.
Printers
Photos
