Rate website
Rate website
Dental Soft Pink
Description
Dental Soft Pink is used for printing gingiva masks in a digital workflow. Mechanical properties are close to real gingiva: good elasticity and softness, necessary to simulate soft tissue. The slight odor and lack of hazardous monomers allow for performing printing even in a small laboratory.
Characteristics
- Clear colored liquid Appearance
- Pink Color
- 140 ± 20 % Elongation at break
- - Hardness Shore D
- Weak odor Odor
- <0.5% Shrinkage
- 6.0 ± 2.0 MPa Tensile strength
- 350 ± 150 mPa*s Viscosity according to Brookfield
Product video
Benefits
Safe
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
Low shrinkage
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
Accurate
Provides high precision printing
Biocompatible
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Durable
Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears
Sertification
Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN 2020/12007
Printers
Photos
