Form2 Dental Sand
Description
Dental Sand is a resin with PMMA-type ceramic micro filling, made of biocompatible material, with color corresponding to A1-A2, A3 . It has high durability and high tensile strength, resistant to mechanical and chemical stress. Recommended for printing models of temporal crowns and bridges. Slight odor and lack of hazardous monomers allow for using it even in a small laboratory. Meets the requirements of iso 10993.Certified for medical use. Registration certificate for medical device № RZN 2020/12007 (Federal Service for Surveillance in Healthcare).
Characteristics
- Opaque liquid Appearance
- Beige Color
- 7.1 ± 3.1 % Elongation at break
- 84.0 ± 2.0 Hardness Shore D
- <0.5% Shrinkage
- 57.4 ± 4.8 N/mm2 Tensile strength
- 375 ± 225 MPa*s Viscosity according to Brookfield
Benefits

Unique mechanical properties
Very high hardness, tensile strength, abrasion and scratch resistance due to ceramic fillers
Odorless
Resins are odorless and cause no irritation, so you can work with natural ventilation without special technique
Stable color
Depending on postcuring condition. Bleach color is achievable. It is stable for a long time even in aggressive media
Biocompatible
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Chemical resistance
Resin is stable to solvents, aggressive inorganic media like acids and alkalis
Durable
Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears