Rate website
Rate website
Form2 Dental Clear
Only for Formlabs printers!
Description
Dental Clear Form2 is a hard PMMA-like resin, made of biocompatible raw materials. Precise, chemical resistant, and durable. The slight odor and lack of hazardous monomers allow for using it even in a small laboratory.
Characteristics
- Clear liquid Appearance
- Clear Color
- 6.4 ± 2.2 % Elongation at break
- 80.0 ± 3.0 Hardness Shore D
- Weak odor Odor
- <0.5% Shrinkage
- 37.0 ± 4.0 MPa Tensile strength
- 300 ± 150 mPa*s Viscosity according to Brookfield
Benefits
Safe
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
Low shrinkage
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
Biocompatible
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Liquid
The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time
Sertification
Biocompatibility was confirmed by the third-party laboratories. Material was successfully tested in accordance with ISO 10993 with the provision of the MA No. RZN 2020/12007
Printers
