Rate website
Rate website
Form2 Dental Peach
Only for Formlabs printers!
Description
Dental Peach is a matte resin, made of biocompatible material used in UV-cure dental fillings. . It has high durability and high tensile strength, resistant to mechanical and thermal stress. Recommended for production of demonstration models and printing of master-models. Slight odor and lack of hazardous monomers allows for performing printing even in a small laboratory. Meets the requirements of iso 10993. Certified for medical use. Registration certificate for medical device № RZN 2020/12007 (Federal Service for Surveillance in Healthcare).
Characteristics
- Opaque liquid Appearance
- Peach Color
- 6.1 ± 2.1 % Elongation at break
- 80.0 ± 2.0 Hardness Shore D
- Odorless Odor
- <0.5% Shrinkage
- 41.2 ± 4.4 MPa Tensile strength
- 450 ± 150 MPa*s Viscosity according to Brookfield
Benefits
Accurate
Provides high precision printing
Odorless
Resins are odorless and cause no irritation, so you can work with natural ventilation without special technique
Low shrinkage
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring
Biocompatible
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Heat resistance
Models has long-term stability under 100°. Also has short-term stability up to 180°C and can be used for films thermosettling
Durable
Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears
Printers
Photos
