Rate website
Rate website
Anycubic Photon Mono X
If you have any questions about how to upload profiles to the slicer, use our guide. To accurately calibrate the printer exposure time, use our calibration test, you can learn more about it in our guide about the test.
Here is approximate curing time for HARZ Labs resins for Anycubic Photon Mono X. Please use our calibrating file for fine calibrating your own 3D printer.
Resin | Bottom Layer Count, pcs | {{mess_illumination}} | {{mess_footer}} | Light-off Delay, sec | Lifting distance, mm | Lifting speed, mm/min | Retract Speed, mm/min |
---|---|---|---|---|---|---|---|
{{getName(item.NAME)}} | {{getVal(item, item.PROPERTIES.BASE_LAYORTS.VALUE)}} | {{getVal(item, item.PROPERTIES['T_' + sizes[activeBtnId].count + '_ILLUMINATION'].VALUE)}} | {{getVal(item, item.PROPERTIES['T_' + sizes[activeBtnId].count + '_ILLUMINATION_FOOTER'].VALUE)}} | {{getVal(item, item.PROPERTIES.PAUSE_FOOTER.VALUE)}} | {{getVal(item, item.PROPERTIES.TABLE_HEIGHT.VALUE)}} | {{getVal(item, item.PROPERTIES.TABLE_UP.VALUE)}} | {{getVal(item, item.PROPERTIES.TABLE_DOWN.VALUE)}} |