Rate website

General impression of working with the website

Suggestions for improving

Thank you!
Choose a grade
Please share your opinion on how the website can be improved
Rate website

Uniformation GK Two

If you have any questions about how to upload profiles to the slicer, use our guide. To accurately calibrate the printer exposure time, use our calibration test, you can learn more about it in our guide about the test.

Here is approximate curing time for HARZ Labs resins for Uniformation GK Two. Please use our calibrating file for fine calibrating your own 3D printer.

Need technical support help?
Resin Bottom Layer Count, pcs {{mess_illumination}} {{mess_footer}} Light-off Delay, sec Lifting distance, mm Lifting speed, mm/min Retract Speed, mm/min
{{getName(item.NAME)}} {{getVal(item, item.PROPERTIES.BASE_LAYORTS.VALUE)}} {{getVal(item, item.PROPERTIES['T_' + sizes[activeBtnId].count + '_ILLUMINATION'].VALUE)}} {{getVal(item, item.PROPERTIES['T_' + sizes[activeBtnId].count + '_ILLUMINATION_FOOTER'].VALUE)}} {{getVal(item, item.PROPERTIES.PAUSE_FOOTER.VALUE)}} {{getVal(item, item.PROPERTIES.TABLE_HEIGHT.VALUE)}} {{getVal(item, item.PROPERTIES.TABLE_UP.VALUE)}} {{getVal(item, item.PROPERTIES.TABLE_DOWN.VALUE)}}