Rate website

General impression of working with the website

Suggestions for improving

Thank you!
Choose a grade
Rate website

Phrozen Shuffle 2018

If you have any questions about how to upload profiles to the slicer, use our guide. To accurately calibrate the printer exposure time, use our calibration test, you can learn more about it in our guide about the test.

Here is approximate curing time for HARZ Labs resins for Phrozen Shuffle 2018. Please use our calibrating file for fine calibrating your own 3D printer.

Resin Bottom Layer Count, pcs {{mess_illumination}} {{mess_footer}} Light-off Delay, sec Lifting distance, mm Lifting speed, mm/min Retract Speed, mm/min
{{getName(item.NAME)}} {{getVal(item, item.PROPERTIES.BASE_LAYORTS.VALUE)}} {{getVal(item, item.PROPERTIES['T_' + sizes[activeBtnId].count + '_ILLUMINATION'].VALUE)}} {{getVal(item, item.PROPERTIES['T_' + sizes[activeBtnId].count + '_ILLUMINATION_FOOTER'].VALUE)}} {{getVal(item, item.PROPERTIES.PAUSE_FOOTER.VALUE)}} {{getVal(item, item.PROPERTIES.TABLE_HEIGHT.VALUE)}} {{getVal(item, item.PROPERTIES.TABLE_UP.VALUE)}} {{getVal(item, item.PROPERTIES.TABLE_DOWN.VALUE)}}