Rate website

Settings for Anycubic Photon

Here is approximate curing time for HARZ Labs resins for Anycubic Photon. Please use our calibrating file for fine calibrating your own 3D printer.

Resin	Exposure 50µm (Base exposure)	Exposure 100µm (Base exposure)	Lift/retract speed	Wait before print
Dental Sand A1-A2	15-17,4s (160s)	21,9-25,4s (240s)	100mm/min 1,7mm/s	1s
Dental Sand A3	15,1-17,6s (160s)	22,1-25,7s (240s)	100mm/min 1,7mm/s	1s
Dental Bleach	14,6-16,9s (160s)	21,5-25s (230s)	100mm/min 1,7mm/s	1s
Dental Yellow Clear	10,7-12,5s (120s)	16,1-18,7s (170s)	100mm/min 1,7mm/s	1s
Dental Clear	16,1-18,7s (170s)	23-26,8s (250s)	100mm/min 1,7mm/s	1s
Dental Peach	13,2-15,4s (140s)	19,2-22,3s (210s)	100mm/min 1,7mm/s	1s
Dental Pink	12,8-14,9s (140s)	18,4-21,4s (200s)	100mm/min 1,7mm/s	1s
Dental RO	15-17,4s (160s)	21,9-25,4s (240s)	100mm/min 1,7mm/s	1s
Dental Cast Cherry	33,4-38,9s (360s)	-	50mm/min 0,8mm/s	1s
Dental Cast Red	33,4-38,9s (360s)	-	50mm/min 0,8mm/s	1s
Model Black	16,1-18,7s (170s)	-	200mm/min 3,3mm/s	1s
Model Blue	11,9-13,8s (130s)	17,3-20,1s (190s)	200mm/min 3,3mm/s	1s
Model Cherry	17,3-20,1s (190s)	-	200mm/min 3,3mm/s	1s
Model Clear	15,5-18,1s (170s)	21,9-25,4s (240s)	200mm/min 3,3mm/s	1s
Model Grey	17,3-20,1s (190s)	25,3-29,5s (270s)	200mm/min 3,3mm/s	1s
Model NC	11,5-13,4s (120s)	17,3-20,1s (190s)	200mm/min 3,3mm/s	1s
Model White	14,2-16,5s (150s)	25,7-29,9s (280s)	200mm/min 3,3mm/s	1s
ART Glow	12,6-14,7s (140s)	18,4-21,4s (200s)	100mm/min 1,7mm/s	1s
Basic Red	13,8-16s (150s)	20,7-24,1s (220s)	100mm/min 1,7mm/s	1s

Did the article help you?

Yes

No