Rate website

Settings for Uniz Slash 2

Here is approximate curing time for HARZ Labs resins for Uniz Slash 2. Please use our calibrating file for fine calibrating your own 3D printer.

Resin	Exposure 50µm (Base exposure)	Exposure 100µm (Base exposure)	Lift/retract speed	Wait before print
Dental Sand A1-A2	3,9-4,5s (40s)	5,7-6,6s (60s)	100mm/min 1,7mm/s	1s
Dental Sand A3	3,9-4,6s (40s)	5,7-6,7s (60s)	100mm/min 1,7mm/s	1s
Dental Bleach	3,8-4,4s (40s)	5,6-6,5s (60s)	100mm/min 1,7mm/s	1s
Dental Yellow Clear	2,8-3,2s (30s)	4,2-4,9s (50s)	100mm/min 1,7mm/s	1s
Dental Clear	4,2-4,9s (50s)	6-7s (70s)	100mm/min 1,7mm/s	1s
Dental Peach	3,4-4s (40s)	5-5,8s (50s)	100mm/min 1,7mm/s	1s
Dental Pink	3,3-3,9s (40s)	4,8-5,6s (50s)	100mm/min 1,7mm/s	1s
Dental RO	3,9-4,5s (40s)	5,7-6,6s (60s)	100mm/min 1,7mm/s	1s
Dental Cast Cherry	8,7-10,1s (90s)	-	50mm/min 0,8mm/s	1s
Dental Cast Red	8,7-10,1s (90s)	-	50mm/min 0,8mm/s	1s
Model Black	4,2-4,9s (50s)	-	200mm/min 3,3mm/s	1s
Model Blue	3,1-3,6s (30s)	4,5-5,2s (50s)	200mm/min 3,3mm/s	1s
Model Cherry	4,5-5,2s (50s)	-	200mm/min 3,3mm/s	1s
Model Clear	4-4,7s (40s)	5,7-6,6s (60s)	200mm/min 3,3mm/s	1s
Model Grey	4,5-5,2s (50s)	6,6-7,7s (70s)	200mm/min 3,3mm/s	1s
Model NC	3-3,5s (30s)	4,5-5,2s (50s)	200mm/min 3,3mm/s	1s
Model White	3,7-4,3s (40s)	6,7-7,8s (70s)	200mm/min 3,3mm/s	1s
ART Glow	3,3-3,8s (40s)	4,8-5,6s (50s)	100mm/min 1,7mm/s	1s
Basic Red	3,6-4,2s (40s)	5,4-6,3s (60s)	100mm/min 1,7mm/s	1s

Did the article help you?

Yes

No