Designed for printing of transparent clear models, such as aligners, kappa. Precise, transparent, very tough and hard, odorless
Dental Clear resin is hard PMMA-like hard clear resin designed for printing models, used in dental application, where transparency is one of the main issues. It can be demonstration models for operation planning, aligners, surgical guides
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction, can be used in lab or even at home
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring.
The resin has relatively low viscosity. It decreases time for levelling, easy to clean to provide maximum accuracy at minimum time.
Very high hardness and tensile strength
High transparency and low yellowing after post treatment
|Viscosity according to Brookfield||0.9-1 Pa*s|
|Tensile strength||60 N/mm2|
|Elongation at break||4-6%|
|Hardness Shore D||90-92|