Designed for dental demonstration models and master-models. Tough, hard, stable to high temperatures during thermoforming aligners
Dental Peach resin is matt pale orange colored resin made of biocompatible raw materials that used in UV-cured dental fillings. It has high hardness 87 Shore D and high tensile strength, stability to mechanical and thermal stress. We recommend to use it for demonstrational and master-model printing. Low odor and absence of harmful monomers allows to print in the laboratory.
Very precise resin, able to print dental models where exact size and fitting is a must
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction, can be used in lab or even at home
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring.
Very high hardness and tensile strength
Models are stable to short-term thermal stress and can be used for film thermosettling
Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears
|Viscosity according to Brookfield||1-1.2 Pa*s|
|Tensile strength||60 N/mm2|
|Elongation at break||4-6%|
|Hardness Shore D||85-87|