Designed for dental demonstration models of crowns and bridges. Very tough, non-irritant, odorless resin with A1-A2, A3 and Bleach colors according to Vita scale
Dental Sand resins is PMMA-like micro filled composite resin, made of biocompatible raw materials, with A1-A2, A3 and Bleach colors according to Vita scale. It has high hardness 90 Shore D and high tensile strength, stable to mechanical stress and chemicals. Recommended for printing of temporary crowns and bridges. Low odor and absence of harmful monomers allows to print in the laboratory.
Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction. Сan be used in lab or even at home
Produced from biocompatible raw material used in photopolymer teeth fillings. Meets the standard ISO 10993
Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn’t change size after postcuring.
Unique Mechanical properties
Very high hardness, tensile strength, abrasion and scratch resistance due to ceramic fillers
High chemical resistance
Resin is stable to solvents, aggressive inorganic media like acids and alkalis
Depending on postcuring condition A1 or A2 color is achievable. It is stable for a long time even in aggressive media.
Pigments and fillers are well stabilized, no sedimentation and flocculation occur ang no foam appears
|Color||A1-A2, A3, Bleach|
|Viscosity according to Brookfield||1,2-1.5 Pa*s|
|Tensile strength||60 N/mm2|
|Elongation at break||3-4%|
|Hardness Shore D||90-92|